huawei Hibrid ONU GEPON XPON 5dBi HG8546M optical network terminal
HG8546M G/EPON ONT is a new terminal level G/EPON ONT, which is a variety of FTTB \ FTTH \ FTTO accessing ONT published by HUAWEI for ISPs FTTH network applications. It can support pure data, Data +Voice, Data+ Voice+ WIFI and other service accessing type. HG8546M ONT supports standard OMCI, can provide up to 1.25Gbps uplink and 2.5Gbps downlink high-speed transfer rate. It can fully meet ISPsFTTB\FTTH\FTTO equipment needs, working with our NGBN unified network management system. The full
functionality of HG8546M can support
Specifications
Parameters | EchoLife EG8546M |
Dimensions (H x W x D) | 156 x 125 x 28 mm |
Gross Weight | 210g |
Operating Temperature | 0°C to 50°C |
Operating Humidity | 5% RH to 95% RH (non-condensing) |
Power Adapter Input | 100 V to 240 V AC, 50 Hz/60 Hz |
System Power Supply | 11 V to 14 V DC, 0.5 A |
Ports | 1GE+3FE+1POTS+1USB+11n WIFI 5dBi |
Optical Connector | SC/UPC |
Indicators | Power/PON/LOS/LAN/TEL/USB/WLAN/WPS |
Features
- G/EPON Hibrid Wan port with 1.244Gbps uplink / 2.488Gbps downlink link speed
- Active Ethernet WAN port with 1.25Gbps bi-direction link speed
- 1x GE+3FE Ethernet RJ45 Ports
- 2x2 11n WIFI support 300Mbps link speed
- 1x FXS RJ11 ports for Voice service
- 1x USB ports in host or device mode
- DC 12V adaptor, max 1.5A current
- -5 to 50ºC operating ambient temperature
Mounting an ONT onto the wall
- Mark two positions with the same spacing as that between the two mounting holes of the ONT using a marker on a wall.
- Select a proper drill bit according to the outer diameter of the screws. Use a hammer drill to drill the marked positions on the wall. Then clean the holes and install two expansion bolts.
- Use a screwdriver to fasten the screws into the expansion bolts, reserving 5 mm ends out of the wall, and mount the ONT onto the screws
Related Products