Description
EONU 1GE+CATV SF RF(DT-EONU+1GE+CATV SF RF) is fiber to the home multi service access EPON ONU. It's based on the mature, stable, high cost performance EPON technology and has gigabit Ethernet switching, WDM and HFC technology. DT-EONU+1GE+CATV SF RF has a higher bandwidth, higher reliability, easy management and good quality of service (QoS) guarantee with technical performance of equipment meet the IEEE802.3ah requirements and have good compatibility with third party manufacturers OLT.
EPON technology is a kind of emerging technology which takes advantage of PON technology and Ethernet technology also is a kind of point to multi-point network technology. OLT through the passive optical network to connect multiple ONU with single fiber bidirectional technical can rarely used fiber resources to meet the operators of the multi-user access requirements.
It adopts single fiber WDM technology with downlink wavelength 1550nm and 1490nm, uplink wavelength 1310nm . It only needs one-core fiber to transmit data and CATV service.
Features
⊙Support port flow control
⊙Support software online upgrading
⊙Up to 20KM transmission Distance
⊙In compliant with IEEE802.3ah Standard
⊙Support port mode of VLAN configuration
⊙Support broadcasting storm resistance function
⊙Support Dynamic Bandwidth Allocation (DBA)
⊙Support port-based rate limitation and bandwidth control;
⊙Support ACL and SNMP to configure data packet filter flexibly
⊙Support power-off alarm function ,easy for link problem detection
⊙Support data encryption, group broadcasting, port Vlan separation ,etc.
⊙EMS network management based on SNMP ,convenient for maintenance
⊙Support ONU auto-discovery/Link detection/remote upgrade of software;
⊙Specialized design for system breakdown prevention to maintain stable system
Specification
| Item | Parameter |
| PON Interface | 1 EPON optical interface Meet 1000BASE-PX20+ standard Symmetric 1.25Gbps upstream/downstream SC single-mode fiber split ratio: 1:64 Transmission distance 20KM |
| User Ethernet Interface | 1*10/100/1000M auto-negotiation Full/half duplex mode RJ45 connector Auto MDI/MDI-X 100m distance 1 RF output Female F-Type Connector |
| Power Interface | 12V DC Power supply |
| PON Optical Parameter | Wavelength: Tx 1310nm, Rx1490nm Tx Optical Power: 0~4dBm Rx Sensitivity: -27dBm Saturation Optical Power: -3dBm Connector Type: SC Optical Fiber: 9/125um single-mode fiber |
| Data Transmission Parameter | PON Throughput: Downstream 980Mbps; Upstream 950Mbps Ethernet: 1000Mbps Packet Loss Ratio: <1*10E-12 latency: <1.5ms |
| Business Capability | Layer 2 wire speed switching Support VLAN TAG/UNTAG,VLAN translation Support Port-based speed limitation Support Priority classification Support storm control of broadcast Support loop detection |
| Network Management | Support IEEE802.3 QAM, ONU can be remotely managed by OLT Support Remote management through SNMP and Telnet Local management |
| Management Function | Status monitor, Configuration management, Alarm management, Log management |
| Shell | Plastic casing |
| Power | <5W, 12V/0.5A power supply adapter |
| Physical Specifications | Item Dimension:130mm(L)*90mm(W)*30mm(H) Item weight:0.2kg |
| Environmental Specifications | Operating temperature: 0 to 50ºC Storage temperature: -40 to 85ºC Operating humidity: 10% to 90%(Non-condensing) Storage humidity: 10% to 90%(Non-condensing) |
CATV
| Item | Parameter |
| Wavelength | 1550nm |
| Optical return loss | >45dB |
| Input optical power | -18dBm~0dBm |
| RF frequency | 47MHz~1000MHz |
| RF output lever | ≥78dBuV (@-12~-2dBm@85MHz) |
| AGC control accuracy | <±1db |
| Flatness | <±1.5db |
| CNR | >41dB (@-10dBm@DS22 Channel) |
| CSO | >60dBc (@-10dBm@DS22 Channel) |
| CTB | >60dBc (@-10dBm@DS22 Channel) |
| RF output return loss | >14dB |
| RF impedance | 75Ω |
| AGC function | Support |
Application
Typical Solution:FTTHTypical Business:INTERNET
