When setting up a Wi-Fi network, in most cases, your router already comes with an assistant that makes everything work, but that doesn't always mean that it makes you safe.For example, a feature that is usually enabled on this type of device is WPS, which helps people connect to a network without having their password necessarily.Recently, even Google for Android Q wants to remove resources referring to connections of this type to avoid security issues.Fortunately, even if you've left this feature enabled in your router's configuration, it can be reversed for greater security on your network.Here's how to disable your router's WPS function.As mentioned above, WPS ends up being a gateway for people to easily connect to your Wi-Fi network.For example, when trying to connect to WPS, even if the person doesn't have your password, just press the WPS button to be connected.Of course, the process is not always that simple, as there are some more sophisticated routers.In addition, WPS also works with a PIN password, which, being shorter and only numerical, is also easier to have your security broken.As with other settings, you need to know your router's IP address to access its panel where WPS can be disabled.To do this, follow these steps:The process performed below was done on a TP-LINK router, however, it is very similar for devices from other brands.Look:Ready!Now your router is already with the WPS feature disabled and therefore a little more secure against the connection of strangers or intruders.