Community of fiber, mobile and ADSL usersAlthough the GPON standard has several systems for the OLT (Optical Line Terminal = equipment in the exchange) to authenticate the ONTs (Optical Network Terminal, also called ONU, Optical Network Unit) that connect to the network, such as by the number of series, MAC address, LOID (Logical ONU Identifier) ​​and password, Movistar uses only the latter system.This is what the Telefónica1 documentation explains:The ONU Identifier is a number of 14 hexadecimal characters that Telefónica assigns to each residential client connected to its FTTH network.This ONU Identifier must be previously known by the OLT in order to provision the client with the services it has contracted.At the time of the installation of the ONU in the customer's house, said identifier must be configured in the ONU.When connecting the ONU to the FTTH network, the ONU must transmit the ONU Identifier that has been assigned to it, through the PLOAMu Password message.Once the ONU has been validated, by consulting the password table previously stored in the OLT, the client will be authenticated and will have access to the contracted services.That is, the OLT has a list of PLOAM passwords assigned to clients.One of them is ours and as we have seen, it is configured within our ONT, which in the case of the Movistar fiber HGU router, is integrated into the equipment.The PLOAM Password is also often called IdONT or GPON password, but it refers to the same code, which can be found in various formats, such as ASCII characters or hexadecimal code.In the HGU it comes in the latter format.To locate the Movistar IdONT key with an HGU router we have two ways.The most direct way to know the IdONT is by accessing the installation URL.The other way to find out the Movistar IdONT is through the GPON Password Configuration section of the router's web administration interface.Knowing the GPON key of our Movistar client, we can now configure it in a compatible ONT and connect our neutral router to it, replacing the Movistar router.🖥️Ruby/Js 🏋️Fitness 🕺Bachata/cuban salsa 🍄PsychedelicsAn ONT IS NOT a UN;They are similar things, but different.The ONU sits between the ONT and the OLT.You are right, but going into that level of detail is not helpful to the reader or the purpose of my post.authenticate ONTs (Optical Network Terminal, also called ONU, Optical Network Unit)Yes, but honestly I think it is much more useful NOT TO CONFUSE the forum members by saying that an ONT and a UN are the same;when they are not.In the case of FTTH networks, the ONT acts as the ONU, in fact that is its function, to convert the Optical signal into an electrical one.In a GPON network, there is nothing electronically between the ONT and the OLT.With that mitrastar that you have given as an example I don't know, but with other HGU manufacturers it is necessary to disconnect the fiber first to be able to access http://192.168.1.1/instalacionWith that MitraStar that you have given as an example, I don't know,You are right, with this router and with any other, if you want to enter the "Installation" menu, to modify the iDONT and the Password, you have to do it with the fiber cable disconnected;if it is connected to the router you CANNOT DO IT.in case anyone is interested thanks to this I have achieved the following and everything works perfectly without problems, in short I went to o2 and they brought me the latest MitraStar that there is and the truth is that it is perfect but for one thing I had to do a portability again and They brought me another router, the last askey, the one with the ugliest interface than hitting a father, well, I took the idont out of the askey, I put it in the MitraStar, I did a factory reset and with the download everything was perfect, the internet, the landline, etc. exactly the same as when they put it on me for the first time, so now I'll keep this one and I'll return the askey heheHello, I tried to get the key using the 2 ways and only 0000 appears to meI have an RTF8115VW, and when I go to http://192.168.1.1/installation I get: Access Error: 404 – Not Found.From the advanced config I can't get the IdONT.Will I be able to get it out via SSH?Does anyone know the command line?Thank you!Moderators |Standards |Legal information |We enter for affiliated purchases